63
Editing
Editing Layers
Ö Support of modulation of the sample start depends on the content. The factory
content does not support this function.
The following destinations are only available for synth layers:
Modulation Modifiers
The modulation modifiers are available from the Modifier pop-up menu.
Sample & Hold
The sample & hold modifier takes a sample of the modulation source whenever it
receives a trigger signal. It holds the sampled value until it gets a new trigger. This
way, you can quantize a continuous modulation signal. The sample & hold offers
different options you can select from the submenu:
Option Description
Osc1/2/3 Pitch Modulates the pitch of the corresponding oscillator. For example,
assign one of the LFOs to detune the oscillator cyclically.
Osc1/2/3 Level Modulates the volume of the corresponding oscillator. For example,
assign the modulation wheel to fade the oscillator in and out while
you play.
Osc1/2/3 Multi
Detune
Modulates the detune of the individual oscillator voices produced by
multi-oscillator mode.
Osc1/2/3 Multi
Pan
Modulates the pan position of the individual oscillator voices
produced by multi-oscillator mode.
Osc1/2/3 Multi
Voices
Modulates the number of oscillator voices produced by multi-
oscillator mode.
Osc1/2/3
Waveform
Modulates the shape and character of the corresponding oscillator.
For example, assign one of the envelopes to change the character
of the oscillator over time.
Sub Osc Level Modulates the volume of the sub oscillator. For example, assign the
modulation wheel to fade in the oscillator while you play.
Ring Mod Level Modulates the volume of the ring modulation effect. For example,
assign the modulation wheel to fade in the ring modulation while
you play.
Noise Gen Level Modulates the volume of the noise generator. For example, assign
the modulation wheel to fade in the noise generator while you play.
Option Description
Trigger on Note On Select this to trigger the sample & hold manually: Each time you hit a
note, the sample & hold takes a sample.
Trigger on LFO1 Select this for periodic triggering of the sample & hold: The sample &
hold takes a sample each time the waveform of LFO1 crosses the
zero line upwards.
Trigger on LFO2 Select this for periodic triggering of the sample & hold: The sample &
hold takes a sample each time the waveform of LFO2 crosses the
zero line upwards.
Trigger on
Modulation Wheel
Select this to trigger the sample & hold manually: The sample & hold
takes a sample each time the modulation wheel passes the center
position.
To Next Page
Loading...