Tech Support: www.steppir.com/support Tel: 425.891.6134 support@steppir.com
Page 4
DB18 TABLE OF CONTENTS (page 2 of 4) Page(s)
CHAPTER THREE (continued) - MAST PLATE & TRUSS ASSEMBLY
Section 3.2:
Director EHU & return tube assembly drawing 32
Secure the mounting plate & EHU to the boom—Director element 33
Section 3.3:
Return tube mounting—Director EHU 34
Section 3.4:
Driven element EHU assembly drawing 35
Secure mounting plate & EHU to boom—Driven element 36
Section 3.5:
Reflector EHU & return tube assembly drawing 37
Secure mounting plate & EHU to boom—Reflector element 38
Section 3.6:
Return tube mounting—Reflector EHU 39
CHAPTER FOUR—COAX SWITCH HOUSING 40-43
Section 4.0:
Mounting the coax switch assembly 40
Section 4.1
Coax switch wiring 41
Section 4.2
Sealing & securing the coax switch housing 42
Attach the coax jumpers and feed line 43
CHAPTER FIVE—WIRING THE CONNECTOR JUNCTION BOX 44-53
Section 5.0:
Mount the connector junction box onto boom 41
Section 5.1:
Wiring the connector junction box 45-47
Connecting the control cable from coax switch to junction box 48
To Next Page
