14
2.1 Equipment layout
2.3 Special accessories
Description Part no.
WPAC 1 (available from 02.2006)
Pressure hose G 1¼" x 1 m (DN32) 07 44 14
Pressure hose G 1¼" x 2 m (DN32) 18 20 19
Pressure hose G 1¼" x 5 m (DN32) 18 20 20
Pressure hose G 1¼" x 1 m (DN32)
for trimming to size
18 56 47
Hose fittings for pressure hose (DN 32) 07 06 92
Vibration damper G 1¼" x 0.65 m (DN32)
vacuum resistant for well installations
15 42 72
WPKI-H (for cylinder SBP 100) 07 43 14
WPKI-V (for cylinder SBP 100) 07 43 47
WPKI 5 (for cylinder SBP 200, 400 and 700 E) 22 08 30
Cylinder SBP 100 07 42 50
2. Installation instructions for contractors
Cylinder SBP 200 E 18 54 58
Cylinder SBP 400 E 22 08 24
Cylinder SBP 700 E 18 54 59
WPSB 307 (brine assembly) 07 42 01
WPSB 310 (brine assembly) 07 42 02
WPSB 407 (brine assembly) 07 42 03
WPSV 25-4 (brine distributor) 22 03 86
WPSV 32-4 (brine distributor) 22 03 87
WPSV 40-4 (brine distributor) 22 03 89
WPSV 25-6 (brine distributor) 22 03 90
WPSV 32-6 (brine distributor) 22 03 91
WPSV 40-6 (brine distributor) 22 03 92
Concentrated process medium 16 16 96
Ready-mixed process medium 18 54 72
Remote control for heating system FE 7 18 55 79
Remote control for heating system FEK 22 01 93
Contact sensor AVF 6 16 53 41
Immersion sensor TF 6 16 53 42
Fig. 3
1 Brine outlet
2 Brine inlet
3 Flow DHW cylinder
4 Heating flow
5 Heating return
6 Safety assembly connection
(included in the pack)
7 Heating circuit pump / buffer cylinder
loading pump
8 High limit safety cut-out - electrical
supplementary heater
(reset button at the back)
9 Electrical supplementary heater
(internal HS 2)
10 Temperature sensor (flow)
11 Temperature sensor (return)
12 Sight glass
13 Evaporator
14 High pressure limiter
15 Filter dryer
16 Fill & drain valve (heating)
17 Fill & drain valve (brine)
18 Expansion valve
19 Compressor
20 Condenser
21 Low pressure limiter (only for single
phase)
21 ND-sensor (only for triple phase)
22 HD-sensor
23 Temperature sensor (brine outlet)
23 Temperature sensor (brine inlet
(only for single phase)
24 Diverter valve
25 Heat pump manager
2.2 Accessory (part of the standard delivery)
Quantity Description Part no
1 Outside temperature sensor AFS 2 16 53 39
C26_03_01_0277
12 3 4 5
6
7
9
11
13
14
15
16
17
18
19
20
22
23
24
25
8
10
12
21