STIEBEL ELTRON WPF 5 User Manual

8
PRG
PRG
PRG
PRG
PRG
Year STOP
Month STOP
Day STOP
Holiday
Back
HOL / Party
Holiday and party program
In holiday mode, the heat pump system oper-
ates in setback mode, and frost protection for
DHW heating is active. Holiday mode is dis-
played with the flap closed. For the start of the
holidays, the year, month and day are entered;
for its end also enter the year, month and day.
The start and end time is always 24:00 h of
the date entered. After the holiday period has
expired, the heat pump system operates again
in accordance with the previous heating and
DHW program.
In party mode you can extend day mode for
central heating by a few hours. This is dis-
played with the flap closed.
For example, if the heating program normally
switches to setback mode at 22:00 h, and you
set the party mode to two hours, then setback
mode would only begin at 24:00 h.
PRG
PRG
PRG
PRG
Open the control flap.
Hol/Party
HolIDAY
Year Start
MONTH Start
DAY Start
Temperatures
Under menu item temperatures, you can scan
values of the heat pump or heat pump system.
Open the control flap.
TEMPERATURES
OUTSIDE
BACK
TEMPERATURES
Actual or set temperatures will not be dis-
played if the corresponding sensor is
not connected.
Example:
Compressor heat volume in heating mode over
the last 24 hours in kWh
Display
HEAT AMOU TAG KWh

STIEBEL ELTRON WPF 5 Specifications

General

Brand	STIEBEL ELTRON
Model	WPF 5
Category	Heat Pump
Language	English