44
6. Installation conditions according to Stiebel Eltron
installation and operating instructions:
Installation room volume: m³
7. Operating mode
mono mode
dual-mode - parallel
- part parallel
- alternative
Dual-mode heat source
Gas fired boiler
Oil fired boiler
Solid fuel boiler
District heating
Electric heating
8. Hydraulic connection of the
heat pump with buffer cylinder
yes no
Buffer cylinder content
9. DHW heating:
independent of HP
yes no
with external heat exchanger
yes no
with internal heat exchanger
yes no
STE products: types:
Third party products types:
Commissioning report
1. Customer’s address:
2. Installer:
3. Building type:
Detached house
Appartment block
Apartment block/Commercial
Industrial/Commercial
Public building
Single heat pump
Cascade
4. Equipment type:
ID No:
Serial No.
Production No.
5. Heat pump location:
External
Internal Cellar
First floor
Second floor
Top floor
On concrete base
On base plate
On level ground
Horizontal: yes no
Anti-vibration mounts: yes no
To Next Page
Loading...
Need help?
General
