OPERATION
Menu structure
16 | WPM 3 www.stiebel-eltron.com
5.4 SETTINGS menu
Here you can set all system-specific parameters for heating, cooling and DHW modes as well as general settings such as the time.
Note
Some menu items are protected by a code and can only be accessed and adjusted by a qualified contractor.
Note
Not all appliance parameters are displayed in the different menus, depending on which heat pump type is connected.
Level 2 Level 3 Level 4 Level 5
GENERAL
TIME / DATE TIME
YEAR
MONTH
DAY
SET SUMMER TIME DAY BEGINNING
DAY ENDING
CONTRAST
BRIGHTNESS
TOUCH SENSITIVITY
TOUCH ACCELERATION
HEATING
HEATING CIRCUIT 1 COMFORT TEMPERATURE
ECO TEMPERATURE
MINIMUM TEMPERATURE
ROOM INFLUENCE
HEATING CURVE RISE
HEATING CURVE VIEW
HEATING CIRCUIT 2 COMFORT TEMPERATURE
ECO TEMPERATURE
MINIMUM TEMPERATURE
MAXIMUM TEMPERATURE
MIXER DYNAMICS
ROOM INFLUENCE
HEATING CURVE RISE
HEATING CURVE VIEW
STANDARD SETTING BUFFER OPERATION
SUMMER MODE OUTSIDE TEMPERATURE
BUILDING HEAT BUFFER
FLOW PROP HEATING CIRC
MAXIMUM RETURN TEMP
MAXIMUM FLOW TEMPERATURE
FIXED VALUE OPERATION
HEATING CIRCUIT OPTIMAL
FROST PROTECTION
REMOTE CONTROL FE7 HEATING CIRC PRESELECTION
ROOM INFLUENCE
ROOM CORRECTION
PUMP CYCLES
EXTERNAL HEAT SOURCE THREADED IMMERSION HEATER
BOILER
HZG PWM
HEATING CURVE GAP
To Next Page
Loading...
