STIEBEL ELTRON WPM 3 User Manual

OPERATION
Appliance description
www.stiebel-eltron.com WPM 3| 5
3.2 Accessories
FE7 remote control
PIC00000609
The FE7 remote control allows you to:
- Change the set room temperature for heating by ±5°C, for
heating circuit1 or heating circuit2.
- Change the operating mode.
The FE7 remote control features the following controls:
- Rotary selector for changing the set room temperature
- Rotary selector with the following positions
-
Automatic mode
-
Constant setback mode
-
Constant day mode
Note
The remote control is only effective in the automatic mode
of the heat pump manager.
FEK remote control
PIC00000704
The FEK remote control allows you to:
- Change the set room temperature for heating by ±5°C, for
heating circuit1 or heating circuit2.
- Change the operating mode.
The device features the following controls:
- Rotary selector for changing the set room temperature
- “Away” button
- “Info” button
- Button for selecting the following operating modes:
-
Standby mode
-
Automatic mode
-
Constant day mode
-
Constant setback mode
Note
If the FEK is pre-selected for a specific heating circuit,
the heating curve, room temperature and heating pro-
gram parameters are not shown at the WPM3 heat pump
manager.
Internet Service Gateway (ISG)
PIC00001002
The Internet Service Gateway (ISG) is an Ethernet gateway in a
wall mounting enclosure and is connected into the LAN (local
area network).
It enables the convenient operation, adjustment and checking of
heat pump system data via the browser of a computer, laptop or
tablet in the local home network.
If required by the customer, appliance data can be automatically
transmitted to the appliance manufacturer’s Servicewelt portal
via the internet.
Via services, you can access additional options such as system
operation on the go with a smartphone as well as remote setting
of parameters and remote diagnosis, etc.
You can find the current services on our homepage.
Mixer module MSMW
PIC00000599
The MSM is an extension module for the WPM 3 which makes
additional functions available.
The MSM can also be used as an independent mixer control. In
this case, an outside temperature sensor has to be connected to
the MSM as it cannot communicate with the WPM.
The MSM is operated in the same way as the WPM II.
MSMS 3 mixer and swimming pool module
PIC00005250
The MSM is a control panel module for the WPMS3 which makes
additional functions available. The module does not have its own
programming unit; it is operated via the WPM3. The menus are
extended accordingly.

STIEBEL ELTRON WPM 3 Specifications

General

Brand	STIEBEL ELTRON
Model	WPM 3
Category	Heat Pump
Language	English