Stihl MH 600.1 - Attaching the Transport Handle; Attaching the Guard and Covers; Attaching the Guard

0478-404-9807-A
51
English 6 Assembling the Cultivator
► Fasten the cables to the handlebar at regular intervals
using cable ties (13).
► Secure cables (14) by bending the cable clip (15) on the
tiller.
► Secure cables (16) by bending the cable clip (17) on the
tiller.
6.5 Attaching the Transport Handle
► Hold transport handle (1) against console (2) so the bores
align.
► Fit spring washers (3) and washers (4) on bolts (5).
► Insert bolts (5) together with spring washers (3) and
washers (4).
► Tighten bolts (5) to 22 Nm to 28 Nm.
Transport handle (1) is locked in place.
6.6 Attaching the Guard and Covers
6.6.1 Attaching the Guard