Stihl MH 600.1 - Maintenance; Maintenance Intervals; Lubricating the Gearbox

0478-404-9807-A
64
English 16 Maintenance
► Place the front wheel in the transport position.
► Fasten blade spur at fifth bore.
► Turn the gearbox oil cap anti-clockwise until it can be
removed.
► Remove the gearbox oil cap.
► Add gearbox oil.
► Place the gearbox oil cap on the filler neck.
► Turn the gearbox oil cap clockwise and hand tighten.
The filler neck is sealed.
16.3 Checking the Gearbox Oil Level
► Stop the engine.
► Place the tiller on a level surface.
► Place the front wheel in the transport position.
► Fasten blade spur at fifth bore.
► Turn the gearbox oil cap anti-clockwise until it can be
removed.
► Remove the gearbox oil cap.
► If there is no gearbox oil visible at filler neck (1):
► lubricate the gearbox.
► If there is gearbox oil visible at filler neck (1):
► there is enough gearbox oil in the gearbox.
► Place the gearbox oil cap on the filler neck.
► Turn the gearbox oil cap clockwise and hand tighten.
The filler neck is sealed.
16.4 Changing the Gearbox Oil
► Stop the engine.
► Place the tiller on a level surface.
► Place the front wheel in the transport position.
► Fasten blade spur at fifth bore.