Why is my Stihl MH 710 overheating?
If your Stihl Tiller engine is overheating, ensure the cooling ribs are clean. Check the oil level and top it up if it's low. Remove any earth from the engine's surface. Also, reduce the engine speed if it's too high.
What to do if Stihl MH 710 engine is difficult to start?
If your Stihl Tiller engine is difficult to start or losing power, begin by emptying the fuel tank and cleaning the fuel line and carburettor to remove any water or blockages. Clean the fuel tank to address any contamination. Clean or replace the oil bath air filter if it's dirty. Also, clean or replace the spark plug and make sure you are using the correct fuel.
Why is my Stihl MH 710 Tiller running roughly?
If your Stihl Tiller engine is running roughly, check if the oil bath air filter is dirty and clean or replace it. Ensure that you're using the correct fuel. If the fuel tank is low, refill it.
Why is my Stihl MH 710 smoking so much?
If your Stihl Tiller is producing heavy smoke, drain engine oil if the oil level is too high. Clean or replace the oil bath air filter. Ensure the machine is in a horizontal working position if the angle of inclination is over 15°.
Why is my Stihl Tiller vibrating so much?
If you notice excessive vibration during the operation of your Stihl Tiller, check the engine mounting and tighten the engine mounting bolts if they are loose.
Why is the tilling performance reduced on my Stihl MH 710 Tiller?
If the tilling performance of your Stihl Tiller is reduced, make sure the hoes are installed correctly. Replace the hoes if they are worn. Adjust the blade spur if it is incorrectly set. For a worn drive belt, consult a STIHL specialist dealer.
Why is my Stihl Tiller gearbox so loud?
If you hear a loud gearbox noise from your Stihl Tiller, check the oil level in the gearbox. If components in the gearbox are worn, consult a STIHL specialist dealer.
What to do if the drive shaft doesn't rotate on my Stihl Tiller?
If the drive shaft of your Stihl Tiller does not rotate when the clutch lever is actuated, check or replace the cable if it is defective. If the drive belt is worn, consult a STIHL specialist dealer.
General notes regarding the instruction manual.
Guidance on how to read and interpret the instruction manual's content.
Detailed diagram and labeling of machine components.
General safety regulations and precautions for operating the machine.
Safety guidelines for refilling the fuel tank with petrol.
Recommended clothing and personal protective equipment for safe operation.
Instructions and precautions for safely transporting the machine.
Pre-operation checks and preparations to ensure safe and correct use.
Guidelines and precautions for safe operation of the tiller.
Procedures for cleaning, adjusting, and repairing the machine.
Instructions for storing the machine when not in use for an extended period.
List and identification of standard parts included with the machine.
Step-by-step instructions for assembling and installing machine components.
Procedure for attaching the right-side hoe assembly to the tiller.
Procedure for attaching the left-side hoe assembly to the tiller.
Steps for fitting the running wheels onto the machine.
Guidance for attaching the transport wheel for maneuverability.
Instructions for mounting the brake spur for speed control.
Procedure for attaching the lower section of the handlebar assembly.
Steps for attaching the upper section of the handlebar assembly.
Instructions for fitting the carrying handle to the machine.
Steps for mounting the front and rear guard plate holders.
Procedure for attaching the main guard plates to the machine.
Instructions for fitting the engine and handlebar covers.
Steps for connecting the throttle and clutch cables.
Details on connecting the self-propulsion and reverse gear cables.
Securing control cables to the handlebar using cable ties.
Information on checking and topping up gearbox oil.
Guidance on checking and topping up engine oil and fuel.
Instructions for checking and maintaining the oil bath air filter.
Procedure for installing the running wheels.
Description and function of the machine's main power switch.
Operation and adjustment of the throttle lever for engine speed control.
Function and settings of the drive control lever for forward and reverse movement.
How to engage and disengage the self-propulsion mechanism.
Operation of the lever for engaging and disengaging reverse drive.
Adjusting the handlebar laterally for optimal user positioning.
Information on the headlamp for illuminating the work area.
Description of the PTO drive system and its operation.
Explanation of the safety mechanism preventing inadvertent self-propulsion.
Safety feature preventing unintended reverse drive engagement.
Safety feature preventing inadvertent lateral handlebar adjustment.
Defining the safe operating zone for the tiller operator.
Guidelines for the correct placement and orientation of the tiller during operation.
Recommendations for the operator's posture to reduce fatigue.
Essential checks and preparations before starting to operate the tiller.
How to adjust the height of the upper handlebar for ergonomic use.
Adjusting the handlebar laterally for user comfort and control.
Information on using and positioning the transport wheel.
Adjusting the brake spur to control resistance and propulsion speed.
Step-by-step instructions for safely starting the machine's engine.
Procedure for safely shutting down the machine's engine.
How to activate and deactivate the self-propulsion feature.
Operation of the controls for reverse movement.
Instructions for performing the tilling operation effectively.
Procedure for detaching the hoe assemblies from the machine.
Instructions for cleaning the machine after use or for storage.
Maintenance checks and procedures for the engine.
Maintenance tasks related to the gearbox, including oil checks.
Instructions for maintaining and adjusting control cables.
Recommended schedule for maintenance tasks.
Guidelines for storing the machine when it will not be used for an extended time.
Detailed instructions on how to safely transport the tiller.
Information on recycling and environmentally sound disposal of materials.
Procedures for the proper disposal of waste products and the machine.
Tips for reducing wear and preventing damage to the machine.
List of common replacement parts and their identification numbers.
Official declaration that the product meets EU requirements.
Detailed technical data and specifications for the STIHL MH petrol tiller.
Information regarding REACH regulations for chemical substances.
Common faults, their causes, and recommended solutions for the machine.
Record of initial machine handover and initial service checks.
Confirmation of performed maintenance operations by a specialist dealer.
To Next Page
General
