ENFR
23
0478 404 8805 A - EN
7.14 Attaching cables
Attaching the self-propulsion cable
● Attach self-propulsion cable
connection (1) to lever (4) using
washer (2) and nut (3).
● Hook spring (5) into holder (6).
Attaching the reverse gear cable
● Attach reverse gear cable (1) at
mounts (2) and (3).
7.15 Fastening the cables to the
handlebar
● Fasten the cables to the handlebar
using cable ties (Z) at regular intervals,
as shown.
7.16 Gearbox oil
Gearbox oil:
Check the gearbox oil level at regular
intervals.
Avoid exceeding or falling below the
correct oil level.
Screw on the gearbox oil cap properly
before operating the engine.
7.17 Fuel and engine oil
Avoid damage to the machine!
Top up the gearbox oil before
starting for the first time. Use a
suitable filling aid (e.g. funnel)
when topping up the gearbox oil.
Designation: SAE10W-30
Capacity: 2,3 l
Avoid damage to the machine!
Top up the engine oil before starting
for the first time. Use a suitable
filling aid (e.g. funnel) when topping
up the engine oil and when
refuelling.
To Next Page
Loading...
