ENFR
41
0478 404 8805 A - EN
Fault:
Drive shaft does not rotate when self-
propulsion lever is actuated
Possible cause:
– Cable defective
Remedy:
– Check/replace cable (#)
Fault:
Oil leaking from gearbox/engine
Possible cause:
– Worn or damaged components in
gearbox/engine
Remedy:
– Contact your specialist dealer (#)
21.1 Handover confirmation
21.2 Service confirmation
Please hand this instruction manual
to your STIHL specialist dealer in
the case of maintenance operations.
He will confirm the service operations
performed in the pre-printed boxes.
21. Service schedule
Service performed on
Next service date
1
To Next Page
Loading...
