Stihl TS 700 User Manual

1TS 700, TS 800
English / USA
BA_SE_161_007_01_09.fmPrinted on chlorine-free paper.
Printing inks contain vegetable oils; paper can be recycled.
© ANDREAS STIHL AG & Co. KG, 2008 0458 376 8621 B. M7. B8. FST. Printed in Germany
STIHl
Contents
Guide to Using this Manual .............. 2
Safety Precautions and
Working Techniques ......................... 3
Application Examples ..................... 18
STIHL composite resin
cutting wheels ................................. 21
STIHL diamond cutting wheels ....... 21
Assembling the
bearing and guard .......................... 25
Tensioning the V-belt ...................... 29
Abrasive wheels ............................. 30
Fitting / replacing an
abrasive wheel ............................... 31
Fuel ................................................ 32
Fueling ............................................ 33
Starting / stopping the engine ......... 34
Air filter system ............................... 36
Motor Management ........................ 38
Setting the carburetor ..................... 38
Spark arresting screen
in the muffler ................................... 39
Checking the Spark Plug ................ 40
Replacing the starter rope
and rewind spring ........................... 41
Replacing the V-belt ....................... 43
STIHL cut-off machine cart ............. 43
Storing the machine ........................ 44
Maintenance chart .......................... 45
Main parts of the machine .............. 47
Specifications ................................. 50
Special Accessories ....................... 51
Maintenance and Repairs ............... 51
STIHL Incorporated Federal
Emission Control
Warranty Statement ........................ 52
Trademarks .................................... 54
Allow only persons who understand this
manual to operate your cut-off machine.
To receive maximum performance and
satisfaction from your STIHL cut-off
machine, it is important that you read
and understand
the safety and
maintenance precautions,
starting on
page 3, before using your cut-off
machine.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand some instruction in this
manual.
!Warning!
Because a cut-off machine is a high-
speed cutting tool, some special safety
precautions must be observed to reduce
the risk of personal injury.
Careless or improper use may cause
serious or even fatal injury.

Stihl TS 700 Specifications

General

Maximum Wheel Size	350 mm
Maximum Cutting Depth	125 mm
Cutting Depth	125 mm
Sound Power Level	113 dB(A)
Displacement	98.5 cc
Weight	11.6 kg
Fuel Capacity	1.20 L
Arbor Size	20 mm
Fuel Tank Capacity	1.2 l (40.6 oz.)