Ride on mode driving position
The operator should drive the truck using the
driving and lifting controls located on the tiller
head.
In this configuration:
●
The platform must be fully open
●
With the side protection closed, the maxi-
mum speed of travel is limited for safety
reasons.
●
With the side protection open, the maximum
authorised speed is slightly higher, as the
operator is driving in a safer situation, re-
strained by the side protection.
CAUTION
The truck may be operated in ride on mode with the
side protection either open or closed.
CAUTION
In ride on mode, opening the combi tiller is prohibi-
ted.
If the clasp to close the tiller is not shut properly, the
truck will not start.
DANGER
Risk of falling from the platform.
Position yourself correctly on the platform between
the two operator side protection panels.
Turn corners at low speed.
While driving, firmly grip the handle on the tiller head
with your hands.
DANGER
Do not sit down and do not climb on the side pro-
tection panels
Use
4
Operator position
94 45758043484 EN - 11/2021 - 08
To Next Page
Loading...
