Using the truck
Stopping the truck in emergen-
cies
In an emergency, the power supply to all func-
tions on the truck can be shut down.
– Press the emergency shutdown handle.
This blocks all of the truck functions, so the
truck will brake and stop.
– Before restoring operating conditions, elimi-
nate the causes of the emergency.
– Release the tiller to the rest position.
– To restart the truck, pull the emergency
shutdown handle by lifting it.
CAUTION
This protective device must be used only in emer-
gencies; the repeated use of this device may cause
problems with the electronic equipment or break-
downs.
Starting the truck
Carry out all of the daily checks to be per-
formed by the operator.
Pull the emergency shutdown handle.
Put the tiller in the vertical position.
To start the truck, turn the ignition key. If the
truck has a numeric keypad rather than a key,
insert the appropriate PIN code.
Check the battery charge status on the indica-
tor and replace or charge the battery if neces-
sary.
Use
4
Using the truck
9545758043484 EN - 11/2021 - 08
To Next Page
