Scheduled maintenance
Summary table of maintenance operations
Servicing work every 1000 hours
Transmission
Reduction gear unit: visually check the mounting
Reduction gear unit: check for any leakage
Traction motor: visually check the mounting
Traction motor: clean the cooling fins
Chassis, bodywork and fittings
Battery hood: check
Battery support: check the side stops and their mountings
Battery support (side access): check the battery lock
Battery support (side access): check the roller frames
Battery support (side access): grease the roller frames
Folding platform and side protection (if present): grease
Load wheels: grease the bearings
Steering and wheels
Electric steering
Steering: visually check the mounting
Steering: visually check the mounting of the tiller and of the head (of the steering unit)
Steering: clean, check and grease the pinion gear and the ring gear
Wheels
Wheels: check for any damage, foreign matter and signs of wear
Wheels: check wheel tightness
Brakes
Brakes: check for signs of wear/adjustment
Brakes: check the truck braking
Truck
Pivoting wheel: check the height adjustment
Controls
Accelerator: check
Electrical system
Battery: check the battery condition and that it is correctly mounted
Battery: check the cables and sockets
On-board charger: clean
On-board charger: check operation
Cables and connectors: check the condition and positioning
Electrical components: clean
Maintenance
5
Scheduled maintenance
124 45758043484 EN - 11/2021 - 08
To Next Page
Loading...
