"Double pallet stacker" label (for double pal-
let stacker truck version only)
17
Description of labels
(1) This label indicates the permissible load on
the forks depending on load centre of gravity
and lift height.
(2) This symbol, where present, indicates the
correct use of the operator side panels with
forks raised more than 1700 mm from the
ground (approximately 1800 mm with strad-
dles raised). If the height of the load on the
forks is
greater
than the height of the load
rack, the side panels must be closed (see the
left-hand side of the label). If the height of the
load on the forks is
less
than the height of the
load rack, the side panels can be opened (see
the right-hand side of the label).
(3) This label indicates where to attach the
truck's lifting hook.
(4) This symbol appears on the lift mast and
indicates danger of cutting due to the mast's
moving parts.
(5) This label indicates you should consult the
use and maintenance manual before using the
truck and prior to carrying out any mainte-
nance work.
(6) This label is only present on the version
with initial lift (i). The label indicates that it is
prohibited to lift a load more than 1800 mm
from the ground while the straddles are raised.
To lift a load more than 1800 mm from the
ground, the straddles must be on the ground
(for more information, refer to
⇒
Chapter "Lo-
cation of safety devices", Page 23 ).
(7) This label indicates that you should consult
the specific use and maintenance manual for
the on-board battery charger.
(8) This symbol, where present, indicates that
the truck is set up for the gel battery version.
Do not use other types of battery.
(9) This label is only present on the version
with the on-board battery charger. The label
highlights the possibility of choosing the
charging curve.
(10) This label is only present on trucks sold in
Germany. The label indicates the date of the
truck's periodic safety inspection.
(11) This label is only present on the version
with operator platform and side protection.
The label indicates the setting pressure of the
operator platform depending on the weight of
the operator. 1.5 bar between 50 kg and
70 kg, 2 bar between 70 kg and 90 kg, 2.5 bar
between 90 kg and 110 kg, 3 bar between
110 kg and 130 kg.
(12) This label is only present on the version
with operator platform and side protection.
The label indicates the maximum setting pres-
sure for the operator platform. Caution: In-
creasing the pressure of the control system to
greater than 8 bar is prohibited.
(13) This symbol, where present, indicates
that the truck is set up for the "cold-storage"
version (optional).
(14) This label is only present on the version
with initial lift (i). The label indicates the dan-
ger of crushing feet under the straddles.
(15) This symbol appears on the lift mast and
indicates danger of cutting due to the mast's
moving parts, that carrying people on the truck
is prohibited and that standing or passing un-
der the raised forks is prohibited.
(16) This symbol appears on the battery hood
and indicates the danger of crushing and/or
cutting hands while opening and/or closing the
battery hood on the entire perimeter of the
hood. Take care when operating.
(17) This symbol is present only on the double
pallet stacker version. It provides information
on handling loads with the double pallet stack-
er truck version.
⇒
Chapter "Additional designa-
tion plate for the double pallet stacker version
(EXV-D)", Page 60
Overview
3
Markings
56 45758043484 EN - 11/2021 - 08
To Next Page
Loading...
