●
Make sure that the lights work correctly (if
applicable).
●
Visually check that the chains are taut.
●
Make sure that the start/stop key works cor-
rectly.
●
Check that the fork arms are in good condi-
tion;
●
Check that the fork arm control levers work
correctly
●
Check engine coolant level and fill in if nec-
essary.
●
Check the cooling system for leaks and cor-
rect function
●
Visually check the condition of the internal
combustion engine .
●
Check the exhaust system for leaks
●
Check the LPG system for damage, check
that the screw joints are securely seated,
and check for leaks using leak detection
spray..Or if the fault appears (L01/
L03).,please aslo check these condition.
●
Check the shut off valve if L01 fault appears
●
Check brake oil level.
●
Check the fuel level and clips
●
Check transmission oil level.
●
Check axle oil level.
●
Engine oil level checking procedure
CAUTION
DO NOT use the truck, but call the technical service
department, if you notice any malfunctions or if you
have any doubts about its correct operation.
Use and Operation
4
Remaining ready for operation
4960118011601 EN - 09/2020
To Next Page
Loading...
