– Move the lever (3) in the opposite direction
of travel: (A) FORWARDS, (B) BACK-
WARDS; then press the accelerator pedal
(2) .
The forklift truck will now accelerate in the new
drive direction.
DANGER
Using operating lever to directly reverse the operat-
ing direction of the forklift truck during operation is
strictly prohibited. Reversing direction during opera-
tion will result in damage to the forklift truck.
Driving brake pedal and inching
pedal
NOTE
We recommend that the driver familiarizes
himself with the efficacy of the braking appara-
tus when the forklift truck is not carrying a
load. Operate the forklift truck slowly on an un-
crowded road surface to test travelling func-
tions.
Driving brake pedal
Press the brake pedal(2)to slow or stop the
truck. At the same time, the brake lights come
on.
Inching pedal
– If the inching pedal (1) is depressed, the en-
gine is disengaged at the beginning of the
pedal travel. The service brake begins to
grip when the pedal is depressed further.
– Small, precise movements of the truck are
possible when you actuate the inching ped-
al (1) lightly if the accelerator pedal is actu-
ated as well. Actuate the pedal (1) in order
to move the truck gradually, even if the en-
gine is running at full capacity.
Use and Operation
4
Using the truck
7960118011601 EN - 09/2020
To Next Page
Loading...
