EasyManua.ls Logo

Still RCG40 - Remaining Ready for Operation; Pre-Shift Checks; Checking the Cap on the High-Pressure Relief Valve on the Outside of the LPG System; Daily Checks before Use

Still RCG40
180 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Remaining ready for operation
Pre-shift checks
Carrying out the following checks as part of
your daily routine will help to keep the forklift
truck in good condition. These checks are
supplemental and do not replace periodic
maintenance work.
NOTE
If, when carrying out the daily checks, you dis-
cover a defect or you are unsure whether the
truck will function properly, do not use the
truck and contact the technical service depart-
ment.
Checking the cap on the high-pres-
sure relief valve on the outside of
the LPG system
Check that the cap (1) on the high-pressure
relief valve is in place and intact. Check the
cap (1) for any damage, holes or wear that
may impair the correct operation of the
valve.
DANGER
If the cap is missing or damaged, gas may escape
uncontrollably.
In such cases, do not put the truck into operation.
Close the bottle immediately and contact the author-
ised service centre.
Daily checks before use
The following checks must be performed on a
daily basis in order to keep your truck in good
condition and to operate safely. These checks
supplement and do not replace the scheduled
maintenance operations.
Check the correct position and fastening, in-
tactness and operation of the various safety
components installed on the truck.
Make sure that "seat switch" is working cor-
rectly.
Check that the brakes work correctly,
checking their travel and efficiency.
Check the tyre pressure and wear condi-
tions.
Visually inspect wheels for correct tight-
ness.
Use and Operation
4
Remaining ready for operation
48 60118011601 EN - 09/2020

Table of Contents

Related product manuals