Parking brake
The parking brake must be actuated every
time the driver exits the truck.
NOTE
If the driver exits the truck without actuating
the parking brake, a warning signal sounds.
This signal even sounds if the truck has al-
ready been switched off and the ignition and
stop key has been removed.
Actuating the parking brake:
– Pull down the parking brake lever(1) until
the lock position is reached and the parking
brake indicator light comes on.
Releasing the parking brake:
– Release the parking brake lever(1).The
parking brake will return to its original posi-
tion and the parking brake indicator light will
turn off.
DANGER
The forklift truck must not be operated if there are
problems with the braking system.
If there is a fault with the braking system or parts of
the system have abraded, please contact your au-
thorised dealer.
Use and Operation
4
Using the truck
8160118011601 EN - 09/2020
To Next Page
Loading...
