Still RCG40 - Ignition Device

Angle adjustment
– Pull down the handle(1) clockwise.
– Move the steering column into the required
position.
– Pull back the handle anti-clockwise to its
original position.
Ignition device
NOTE
The forklift can only be started if the reversing
lever is in the centre position (neutral).
The ignition key has three positions:
Position "0"
●
Key removal position (no circuit powered
except for horn, stop lights; seat and ISO
PCB)
Position "Ⅰ"
●
All circuits are powered
Position "Ⅱ"
●
Engine starting position
Start-up
– To start the engine, insert the key, turn it to
position "Ⅱ" and release it as soon as the
engine starts (the key will go back to posi-
tion "Ⅰ").


Use and Operation
4
Using the truck
7160118011601 EN - 09/2020