Operation 4
Attachments
NOTE
Please observe the definition of the following
responsible person: "competent person".
Load capacity with attachment
The permissible load capacity of the attach-
ment and the allowable load (load capacity
and load moment) of the truck must not be ex-
ceeded by the combination of attachment and
payload. Adhere to the specifications of the
manufacturer or supplier of the attachment.
– Observe the residual load capacity rating
plate, see the chapter entitled "Picking up a
load using attachments".
Depressurising the hydraulic system
WARNING
The movements of the load lift system present a
risk of crushing.
During the process described below, the fork
carriage or the lift mast can only be moved slightly.
– Do not reach into or stand below the components
of the load lift system.
NOTE
The hydraulics are depressurised using a
wizard on the display-operating unit. Access
to the settings menu is only available if the
truck is at a standstill and the parking brake
is applied. If the parking brake is released
prematurely, the settings menu will close.
Access requires authorisation at service level.
If this function is required for daily operation,
contact your authorised service centre. The
authorised service centre can enable the
function for the fleet manager or driver.
563
68011531 EN - 06/2019 - 02 223
To Next Page
Loading...
Need help?
General
