Operation 4
Auxiliary equipment
1
2
Filling the washer system
– Open the filler cap (1) of the washer system.
– Fill the washer reservoir (2) with washer
fluid as described in the "Maintenance data
table".
CAUTION
Damage due to the effects of frost!
When water freezes, it expands. If the washer
system is not filled with fluid that is suitable for use
in winter, ice can form in the washer system and
cause damage.
– If there is a risk of frost, use fluid that is suitable
for winter use.
– Close the filler cap.
– Operate the screen washer system until
washer fluid is discharged from the spray
nozzles.
Ceiling sensor (variant)
Description
1
The ceiling sensor (1) on the overhead guard
is an assistance system that automatically
reduces the driving speed of the truck within
halls. However, this assistance system does
not release the driver from the responsibility
of observing the speed limits on company
premises.
Depending on the system setting, the ceiling
sensor can detect overhead structures above
the truck at a height of 2 m to 24 m above the
sensor.
Operating the ceiling sensor system
Thedriversaretobeinstructedontheuse
of the ceiling sensor system by the operating
company.
When the driver enters a hall for the first
time after starting work, he must be certain
that the ceiling sensor system is functioning
correctly. Despite the ceiling sensor system
being installed, the driver must also check the
speed indicator on the display-operating unit
on a regular basis to ensure that he does not
563
68011531 EN - 06/2019 - 02 259
To Next Page
Loading...
Need help?
General
