Still RX60-35 - Replacing Fuses

Maintenance 5
Preserving operational readiness
23
4
5
7
98
6
6210_600-004
– Check the condition of the main fuse (2) (no
damage to the porcelain body) and check
that it is securely positioned; tighten the
clamping screws if necessary.
– Check the condition of fuses (
3) to (3),
check that the cable connecti
ons are secure
and check for oxidation resi
dues. Clean if
necessary.(9)
NOTE
Depending on the specification, not all fuses
will be present in the truck.
CAUTION
Water in the electrical system can
cause damage to components!
In order to protect the electrical system
against ingress of water, the cover
must be closed.
– Refit the cover after these tasks
have been completed.
– Connect the battery male connector.
– Carry out a functi
onal test.
Replacing fuses
DANGER
Hazard from electrical current!
Take care when handling; there may
be residual capacity present.
Before starting the following mainten-
ance work:
– Park the truck securely.
– Disconnect the battery male
connector.
563
38011803 EN - 02/2019 - 09 401
www.duma-rent.com