SatLink VSAT User Guide
Publication no. 101557
Copyright © 2009 – STM Group, Inc.
Page 155 (160)
Event Severity User action required Comment
DLCP clear all
dynamic routes and
entries
Normal None The STM SatLink VSAT has closed all
dynamic links and deleted all dynamic
routes. This happens when the SatLink
VSAT logs on / off from the Mesh
Network.
DLCP clear all session
data and logon
Normal None The STM SatLink VSAT has closed all
dynamic links and deleted all dynamic
routes. The STM SatLink VSAT tries to
logon to the Mesh Controller.
DLCP max number of
connections reached
Normal None The STM SatLink VSAT has reached the
maximum number of licensed
connections. New connections are
discarded.
DLCP max pending
request reached, force
DLCP re-logon
Major None The STM SatLink VSAT has too many
pending request waiting for response from
the Mesh controller. The STM SatLink
VSAT logs off from Mesh Controller and
attempt to logon again.
BRX HW initialisation
failed
Critical None The STM SatLink VSAT has failed to
initialise the burst receiver for mesh
communication. Contact you Hub
operator, mesh return carrier configuration
shall be verified.
Mesh synchronisation Normal None This event is logged when the STM
SatLink VSAT achieves synchronisation
on the Mesh carrier
Mesh synchronisation
lost
Major None This event is logged when the STM mesh
capable SatLink VSAT is losing
synchronisation on the mesh carriers. The
STM SatLink VSAT will automatically
logoff from the Star Network and re-logon
to re-establish Mesh synchronisation
To Next Page
Loading...
