insert the baud rate of the external radio:
Fig. 5.16 - External radio baud rate
Click on button “OK “ to confirm.
V.2.3.4. Bluetooth
This option give us the possibility to use Bluetooth device for RTK data exchange. In this case
the same channel with commands and position information between handheld and receiver is
used also for transmitting the differential corrections from handheld to the receiver, for
example if the handheld is connected through internet or it is connected to a mobile phone
connected to internet. Please remember that if you select Bluetooth as datalink, you do not see
any datalink led on the display.
To Next Page
Loading...
