Some definitions of working mode:
Static: is the stand-alone station that collect raw observations and need a post-processing in
office for getting accurate results.
Base: is the fixed GPS station used to provide differential corrections to the mobile GPS receiver.
Rover: is the mobile receiver used to survey on field.
Some definitions of available datalink:
Network: is an internet connection by GPRS band to a base that provide differential corrections
or a connection between base and rover by a GSM direct call (like a phone call).
UHF: is a connection between base and rover by the internal radio communication.
External: is a connection between base and rover by an external device attached through the 5-
pin LEMO port, it is usually an external radio.
Bluetooth: is an option for sending or receiving the NTRIP corrections to the receiver through
the Bluetooth channel.
Select “Static” for a static survey operation, “Dynamic” if you want to do RTK measures with
your S8.
V. 2.1. Static Data Survey
Static mode data entry page is reported on Fig 5.5:
To Next Page
Loading...
