Port forwarding allows the configuration of the GNSS OEM module, UHF module and GPRS
module directly. This functionality is valid only for DB9 serial port connection from 5-pin Lemo.
Click on “Serial Port Forwarding”: a new window is opened as in Fig. 5.22.
Fig. 5.22 – Serial Port Forwarding window
Select the module you want to connect and the serial port then press “Open”, then follow the
instruction to restart the receiver. Then you will be able to communicate with the module
directly. Please note that unintended commands might affect the operation of the receiver.
To Next Page
Loading...
