ISP Immersive Sound Processor
11
procedure “Default Passwords” on page 7.
6. Access Management
This area permits a user logged in as installer
to assign access to specific setup functions
to the Expert User. For example, if the ISP is
installed at property with technical staff, the
installer may wish to permit the Expert User to
make changes to the inputs for the purposes
of installing a new source, but restrict their
ability to make changes to speaker EQ, apply
firmware updates, etc. Any setup menu
marked “Y” in grayed is accessible to a user
with the Expert User password.
Note that after making any changes, you must press the
SAVE button near the top right of the screen or you will loose
your changes.
To Next Page
Loading...
Need help?
General