ISP Immersive Sound Processor
23
Tilt EQ Output Mapping
Should you wish to map a physical analog output
channel to a loudspeaker other than the default
assignment, you may do so from the Main
Speakers page. Click Output Mapping.
Using the New Output column on the right of
the pop-up menu, select a new output channel.
If you choose a currently occupied new output
channel, that channel will be automatically
reassigned (swapped). Save to exit and go back
to Main Speakers summary page.
For speakers behind a motorized screen for
example, you might need to change their “audio
brightness” depending on the screen position up
or down. TiltEQ allows the sound to be darker or
brighter.
Note that after making any changes, you must press the
SAVE button near the top right of the screen or you will loose
your changes.
To Next Page
Loading...
Need help?
General