Storz D-ACTOR 200 - Conformity with Standards; EMC Guidelines and Manufacturers Declaration

19 620 02 0117
67
TechnicalSpecications
7.4 Conformity with standards
This device complies with the applicable standards EN 60601-1, CAN / CSA-C22.2 No. 601.1,
UL Std. No. 60601-1.
Acc. to EN 60601-1
- Type of protection against electric pulses: Protection class 1
- Application unit of type B
7.4.1 EMC guidelines and manufacturer’s declaration
Guidelines and manufacturer's declaration – emitted electromagnetic interference
The D-ACTOR
®
200modelisintendedforoperationintheelectromagneticenvironmentspeciedbelow.
The customer or the user of the D-ACTOR
®
200 should ensure that it is used in such an environment.
Interference emission
measurements
Compliance Electromagnetic environment – guidelines
HF emissions acc.
to CISPR 11
Group 1
The D-ACTOR
®
200 uses HF energy only for its internal
functioning. Therefore, its HF emissions are very low and
are not likely to cause any interference in nearby electronic
equipment.
HF emissions acc.
to CISPR 11
Class B
The D-ACTOR
®
200 is suitable for use in all establishments,
including domestic establishments and those directly
connected to the public low-voltage power supply network
that supplies buildings used for domestic purposes.
Harmonic emissions
according to IEC 61000-
3-2
Class A
Voltageuctuations
/icker emissions
according to IEC 61000-
3-3
Complies