Page 10 Strand 301 Console Manual
7. Record Scene– changes function according to the mode of the console.
In back up mode – allows the recording of back up cues from the main lighting
console. 144 back up cues can be recorded. (12 pages of 12 cues each.)
In timed event mode – allows the recording of timed events. 12 timed events can be
recorded. Timed events can be played back in any order.
In manual mode – the record scene button is inactive.
8. LCD Screen – displays current information about the console’s mode and fader status.
9. LED Indicator Lights – display relative brightness when the fader below it is active.
10. DMX IN Indicator – the LED is illuminated when the console is in either back up or event
player mode AND it is receiving DMX from the main console. The LED flashes when DMX is
not being received.
11. Power Switch – turns on / off power to the console.
DMX Input – accepts a DMX512 5 pin XLR connector from the DMX512 output of the main
console.
DMX Output – accepts a DMX512 5 pin XLR connector from the dimmers.
Analogue In – accepts an analogue input for 12 contact closures.
Link Input – as a master 301 console, accepts a DMX512 3 pin XLR connector from the
Link Output of the slave 301 console.
Link Output – as a slave 301 console, accepts a DMX512 3 pin XLR connector from the
Link Input of the master 301 console.
Console Position Switch – sets the console to either master or slave mode.
Power Connector – accepts the power adaptor from the power transformer.
To Next Page
Loading...
