Do you have a question about the Strand Lighting 200 Console and is the answer not in the manual?
Brand | Strand Lighting |
---|---|
Model | 200 Console |
Category | DJ Equipment |
Language | English |
General safety precautions and warnings for operating the lighting control console.
Explanation of the Grand Master fader and the Mode button for console operation.
Details on using Function keys for navigation and the Blackout button for immediate level zeroing.
Instructions for connecting the power adaptor and DMX512 cable to the console.
Procedure for powering on the console and initiating the self-test sequence.
Step-by-step guide for basic level setting and output using faders in Single Scene mode.
Instructions on setting the Grand Master and Preset A/B masters for level control.
Detailed steps for activating and deactivating the Hold feature, including LED indicators.
Steps for basic level control and master adjustments in Two Scene mode.
Explanation of the crossfade function, allowing smooth transitions between scenes.
How to set up and use submasters for manual control of lighting states.
Detailed steps for using the Record button and flash buttons to capture submaster data.
Step-by-step process for executing sequential crossfades between recorded submasters.
Step-by-step guide for recording individual steps within an effect.
Description of the four different effect modes: Chase, Build, Cycle, and Audio.
Details on the four effect direction modes: Random, Forward, Bounce, and Reverse.
Procedures for starting and stopping effects playback using effect buttons and the Go/Stop button.
Steps to load effects onto submaster faders for playback.
How to access the effect editing menu and select an effect to modify.
Instructions on how to modify levels for channels within an effect step.
Procedure for deleting a specific step from an effect.
Procedure for deleting a complete effect from the console.
How to insert a new step into an existing effect sequence.
How to adjust the fade-in time for effect steps.