Strand 200 Console Manual Page 39
4. Audio
5. LCD setting
6. Show file
Esc Next Confirm
1. Patch
2. Self Test
3. Midi
Esc Next Confirm
Scene Pg: 1 Fx Pg: 2
Preset A: FL B: 00
Scene FX Setup
Contrast: 99%
Back lit: high
Esc (+/-) Confirm
LCD Settings
The LCD setting allows the operator to control both the contrast and the backlight level.
Follow the steps below…
Press F3 to go into the Setup menu.
Notice the cursor flashing over the 1 for patch.
Press Next to go to the next setup screen.
Notice the cursor flashing over the 4 for audio.
Press the right arrow key to access LCD setting
then press F3 to Confirm.
Change the level using the +/- keys. Navigate with
the left and right arrow keys.
Press F3 to Confirm.
To Next Page
Loading...
