Strand Lighting 200 Console - Crossfade Start Scene Option

Strand 200 Console Manual Page 31
1. Edit Scene
2. Delete Scene
3. Xfade Start Scene
Esc Confirm
Xfade start address
Scene:1.01
Esc (+/-) Confirm
Crossfade Start Scene Option
Notice the cursor flashing over the 1 for edit scene.
Press the right arrow to advance to the crossfade start
scene option and press F3 for Confirm.
Use the +/– keys to change the submaster that will
start the crossfade sequence.
Press Esc to disregard changes or Confirm to accept.
Note: The next submaster crossfade will start with the selected scene. Upon completion of
the crossfade, the setting will be automatically reset to 1.01.