Strand 200 Console Manual Page 25
Scene Pg: 1 Fx Pg: 2
Preset A: FL B: 00
Scene FX Setup
1. Edit Effect
2. Delete Effect
3. Effect Fade Time
Esc Confirm
Fx:#.# Step:xx
Ch:01 02 03 04 05 06
LL:xx xx xx xx xx xx
Esc (+/-) Confirm
Fx:1.1 Step:01
Ch:01 02 03 04 05 06
LL:FL 00 00 00 00 00
Esc (+/-) Confirm
Editing an Effect
From the main LCD screen, press F2 for FX.
Notice the cursor flashing over the 1 for edit effect.
Press F3 to Confirm.
The Num Lock LED will now be on and the effect
disabled. Pick the effect number then scroll with the
arrow keys to place the cursor on the step location.
Pick the step to be edited.
Note: The format for Fx: #.# is the first number is the effect page and the second is the effect
number.
Continue scrolling and each channel edited will flash.
Edit the level with either the + or – keys or use the
keypad entry.
When editing is complete press Confirm and it will automatically advance to the next step for
continued editing.
Note: The arrow keys will advance channels quickly.
To Next Page
Loading...
