Strand Lighting 200 Console - Set Buzzer

Strand 200 Console Manual Page 43
4. Audio
5. LCD setting
6. Show file
Esc Next Confirm
1. Patch
2. Self Test
3. Midi
Esc Next Confirm
Scene Pg: 1 Fx Pg: 2
Preset A: FL B: 00
Scene FX Setup
Set buzzer
1. Disable buzzer
2. Enable buzzer
Esc Confirm
7. Set buzzer
Esc Next Confirm
Set Buzzer
The internal buzzer can be either enabled or disabled. When turned on, the buzzer will
sound whenever a illegal key is pressed. Follow the steps below…
Press F3 to go into the Setup menu.
Notice the cursor flashing over the 1 for patch.
Press Next to go to the next setup screen.
Notice the cursor flashing over the 4 for Audio.
Press Next to go to the next setup screen.
Notice the cursor flashing over the 7 for Buzzer.
Press F3 to Confirm.
Select enable or disable Buzzer with <> keys.
Press F3 to Confirm.
The Buzzer’s default is enabled.