Page 10 Strand 200 Console Manual
22. Go / Stop Button – allows start and stop of effects.
13. Fader Flash Buttons - will flash the corresponding fader according to the flash mode
and the flash level.
14. Scene B Faders –
Submaster mode – all faders are submasters and not controlled by Preset B.
Two scene mode - bottom row of faders are mastered by Preset B.
One Scene mode – all faders are mastered by Preset A.
15. Submaster Page Button – toggles between page 1 and page 2 of the submaster pages.
The active page will be indicated on the LCD screen as Scene Pg:#
16. Preset A Master –
Submaster mode – used for crossfades between scenes.
Two scene mode – masters the top row of faders.
One Scene mode – masters all faders.
17. Preset B Master –
Submaster mode – used for crossfades between scenes.
Two scene mode – masters the bottom row of faders.
One Scene mode – disabled.
18. Flash Mode –
Off – disabled.
Flash – flashes the level of the corresponding fader. This is mastered by the flash
level master.
Solo – flashes the level of the corresponding fader and takes all other faders to zero.
Solo+Flash – flashes the level of the corresponding fader and takes all other faders
to zero. This is mastered by the flash level master.
19. Flash Level – this sets the level of the flash function.
20. Effects Tile – this grouping of keys allows for recording of effects.
21. Number Lock Indicator – this LED indicates that the Number Lock is on. It allows the
effects tile to become a numeric keypad.
To Next Page
Loading...
