DOC-28000 Rev. I 5-1
5
Handling Printed Models
Removing 3D Prints After Printing 5-2
Removing the Support Material 5-2
Removing Support by Hand 5-3
Removing Support with Water Pressure 5-3
Removing SUP705/705B with Caustic Soda 5-4
Removing SUP706/706B with Caustic Soda and Sodium Metasilicate 5-4
Post-Printing Treatment 5-5
Photobleaching for Transparent 3D Prints 5-5
Storing 3D Prints 5-5
To Next Page
Loading...
