Stratasys J826 - Revision History

Stratasys J826 User Guide 1 About This Guide
DOC-28000 Rev. I 1-3
Revision History
Translations of this guide are updated periodically. If you are consuming a translated
version, please check the English version for the latest revision and list of updates.
The following table lists the main changes in each revision of this document.
Revision Release Date Description
Rev. F December 2020
• About this Guide was updated.
• Improving the Color of X-walls was added.
• Setting the Cartridge Expiration Date was
added.
• Cleaning the Print Head, Roller, and Wiper
was updated with cleaning the UV glass
lenses instruction.
• Aligning the Print Heads was updated.
• Minor text and style corrections.
Rev. G January 2021
• Additional Resources was updated.
• Improving the Color of X-walls was updated
with instructions for placing the
transparency sheet on the scanner glass.
• Workstation Requirements was updated.
• Replacing the UV Lamps was updated with
instructions for replacing the UV lamp bulb.
• Photobleaching for Transparent Parts was
updated.
• Cleaning the Print Heads, UV Glass, Roller
and Wiper was updated with a note to
empty the waste container before starting
the wizard.
• Shutting Down the Printer was updated with
a note to empty the waste container before
starting the wizard.
• Optimizing the Print Heads was updated
with a note to empty the waste container
before starting the wizard.
• Improving the Color of X-walls was updated.
• Text, style and format improvements.
Rev. H February 2021
• Improving the Color of X-walls was updated.
• Text, style and format improvements.