Stratasys J826 - Starting the Printer

Stratasys J826 User Guide 4 Operating and Maintaining the Printer
DOC-28000 Rev. I 4-3
Figure 4-1 The Stratasys J826 3D Printer
Starting the Printer
Caution
l
Do not attempt to operate the printer before being trained by an authorized
Stratasys representative.
l
Observe all safety warnings and follow the safety guidelines described in
Chapter 2.
1. Turn on the main power switch, located at the back of the printer.
Figure 4-2 Main power switch and cable
The main power switch turns on the J826 printer, which includes the built-in
computer.