Stratasys Objet500 - Page 52

Objet500 User Guide 5 Using Objet Studio
DOC-07027 Rev.E 5-19
STLfileloading
preference
Ifthereareidenticallynamedstlfilesinmorethanonelocation,youneedto
ensurethatthecorrectcomponentstlfilesarelinkedtotheobjtf file.For
example,ifthereareidenticallynamedstl filesononedriveandonaflash
drive(thiscanoccurifyoucopytheoriginalfilestoaworkingfolder),youcan
setthedefaultlocationfromwhichfilesareloaded.
TosettheLoadOrder:
1. FromtheToolsmenu,selectOptions.
or—
IntheObjetStudioCommandsmenu ,clickOptions.
2. IntheOptionsdialogbox,displaytheSettingstab.
Figure5-17Optionsdialogbox,Settingstab
3. UnderLoad Search Order,selectanoption:
❒ Local—toloadfilesfromthelocationwheretheywerelastsaved.
❒ Original—toloadfilesintheiroriginallocation.
4. ClickOK.