45 MA_441-1-2_A1_180830_en
4.18
The individual oiling points of the machine are supplied fully automatically; the
machine needs no maintenance in this regard.
Servicing the machine
An oil change should be done about twice a year, depending on the amount of
dust and hours of operation. It is recommended to use 0.5 litres of oil for that;
an oil with the viscosity of 46 cSt.
(Recommended oil: Shell Voltol 46)
Also clean the plastic lever and the boreholes.
4.19
Further details such a sewing instructions and the like can be found in the
operating instructions, on the homepage.
General notes
To Next Page
Loading...
