Strobel VEB100 Series User Manual

26 MA_VEB100-2-4-5_A5-3_230123_en.doc
3.2 Needle lever
3.2.1 Assembly
A T T E N T I O N !
Switch off the machine electrically!
Remove screw (1), move the Thread take-up lever and remove the needle lever. During
installation, please ensure that the needle runs through the centre of the needle
groove and the needle tip is flush with the left needle guide (Fig. 11).
Fig. 11

Strobel VEB100 Series Specifications

General

Brand	Strobel
Model	VEB100 Series
Category	Sewing Machine
Language	English