5 MA_VEB100-2-4-5_A5-3_230123_en.doc
2 General notes
2.1 Operating instructions
Every person in charge of setting up, operating, servicing and repairing the machine
must first read and understand the operating instructions and particularly the safety
instructions before starting up the machine.
2.2 Class description, serial number and initial basis for description
For side-referenced descriptions, the operating side of the machine is the starting
base.
The class descriptions (type), the serial and model number (after the hyphen) can be
found on the rating plate on the back of the machine.
2.3 Range of application and intended use
Class VEB100-2 are universal hemming machines for thin and medium weight material
with cross seams.
Class VEB100-4 serves specifically for uniform, delicate rolling and sewing of the edges
on silk scarves, pochettes, etc. made of thinnest, thin and medium fabrics.
The roll seam width can be varied by exchanging the seamer size.
Class VEB100-5 is suitable for attaching the folded side back and centre back seams of
half-lined sack coats. 6 different folder sizes are available.
Exchanging the variable sewing tools, i.e., can extend the range of applications of the
different machines that other fabric qualities than the above mentioned ones could be
sewn as well.
To Next Page
Loading...
Need help?
General
