36
6.2 System Setting
➍ Security Settings
This submenu allows you to set password options and to lock
or unlock access to menus (✽ Note: PIN code and password are
the same). <Figure 6.2.4>
▪ Receiver Lock: Set ON to require entering a PIN code at powering on.
▪ Install Lock: Set ON to require entering a PIN code to access the
installation menu.
▪ Channel Lock: Set ON to require entering a PIN code to access the
channels menu.
▪ Lock Channel Confirm: Set ON to require entering a PIN code to access
a locked channel.
▪ Age Limit: Set to prevent children or unauthorized people from
watching programs. Select among (Free / 8 above / 12 above / 15
above / 18 above). When program information (age limit) is
available from broadcaster and this age limit exceeds the selection,
a PIN code is required to access the channel/program.
▪ Current Password: To change your password, first enter your current
password.
▪ New Password: Enter the new password that you want to set.
▪ Verify Password: Enter the new password again for confirmation.
✽ Note: The default password is ‘0000’.
To Next Page
Loading...
