Strong SRT 4922B+ - Page 41

41
6.2 System Setting
➐ Front Display Setting
This submenu allows you to set the
Standby Mode. <Figure 6.2.11>
▪ Standby Mode: Select the
Standby Mode.
Figure 6.2.11
➑ Key Setting
This submenu allows you to set the
Function Key (Auto Scan / Lock
Channel / Timer Manager / Dvix List
/...)
Figure 6.2.12
➒ Connecting your receiver to a PC via your Network
1. Follow these instructions prior to connecting your receiver to
your PC:
a) Run the PC Tool program (STB Daemon) before connecting to
your PC, this can be downloaded from
www.strong-technologies.com b) Click Browser and select a
sharing folder on your PC.