42
6.2 System Setting
c) Press 'OK' then select STB Daemon and
the window will be hidden. You can see
the icon on bottom right of the window
screen.
2. Connect an Ethernet cable from your to your PC.
3.Press menu, Select System Settings, Select IP Settings: DHCP
Usage 'ON' and pressing the RED Key
A) If your Network supports DHCP, IP settings can be allocated
automatically by turning DHCP Usage 'ON' and pressing the
RED Key
b) If your Network does not
support DHCP, the IP Address must
be entered manually (Static IP)
c) Click the network icon on
bottom of your PC's
Windows
d) Now select the Support Tap, you
can allocate your IP address.
4. Go to File Manager on your
and press the YELLOW Key to type
the IP address of PC which is
running STB Daemon.
To Next Page
Loading...
