EasyManua.ls Logo

Strong SRT 8222 - 7.4 Picture; 7.5 Channel Search

Strong SRT 8222
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NOTE: For successful editing of channel list (see ch 7.1), switch O LCN function.
7.4 Picture
Use this menu to match your receiver to your TV set.
The following settings are available:
Aspect Ratio: Select the aspect ratio that matches your TV. This There is either a 4:3 or a 16:9
possibility. Select in combination the preferred conversion method how to
show a 16:9 programme on a 4:3 TV, or a 4:3 programme on a 16:9 TV. The
options are:
Auto In most cases this default setting should suce, but it can be changed to
cope with broadcast errors or personal taste.
4:3 Letterbox The full 16:9 programme will be displayed on your 4:3 TV set with black bars
above and below the picture
4:3 Pan&Scan A centre cut-out of the 16:9 programme will be displayed full-screen on your
4:3 TV, missing content to the left and right.
4:3 Full A 16:9 programme will be compressed sideways on a 4:3 TV, to show a full
picture without any black bars
16:9 widescreen A 4:3 programme will be show full screen, with sideways stretched content.
16:9 Pillarbox A 4:3 programme will be shown normally, but with black bars to the left and
right.
16:9 Pan&Scan A 4:3 programme will be shown as a centre blow up to ll the whole screen,
missing content to the left, right, top and bottom of the programme.
16:9 Pillarbox 16:9 Pan&Scan
broadcasts in full screen on a 4:3 TV. Letterbox: black bars on top and bottom
of the picture on a 4:3 TV. Combined: shows a mix in-between. Ignore: shows
as it is.
Resolution If the video quality does not appear correctly, change the setting. These
settings match the most common settings for HDMI.
576i: For analogue TVs (on Scart connection).
576p: For digital SD TVs (some digital TVs do not support this mode).
720p: For digital HD TVs (on HDMI connection).
1080i: For digital HD TVs (on HDMI connection).
1080p(50Hz): For digital HD TVs (on HDMI connection).
Auto: The best possible resolution available will be auto negotiated by between
TV and receiver (‘handshake') when using a modern digital HD TV when
connected with an HDMI cable.
TV Format Options are PAL and NTSC. For European broadcasts, the TV format is PAL
(Default). The setting is most important for TVs connected via Scart cable.
Using NTSC might deliver black& white pictures.
7.5 Channel Search
Auto Search This menu allows you to search for channels from all available frequencies
for your selected region automatically. Be aware that all previous installed
channels and favourite list(s) will be deleted. The new-found channels will be
14

Related product manuals